Display Cases

PP355C Crystal Clear Display Case for 1:18 scale diecast collectible model car. This Crystal Clear Case dimension is 13.25"L x 5.75"W x 5.5"H. It features beveled edge & stackable design. Three distinctive "garage background" theme on the box for customizing display if desire. Each Display Case individually packed in a box.

PP083C Crystal Clear Display Case for 1:32 scale diecast collectible model car. This Crystal Clear Case dimension is 7.875"L x 3.875"W x 4"H.

1:43 & 1:72 Military Case by Trumpeter Item Number: TRP9816 This is a Trumpeter Models 9816 Display Case. This features Dust Resistant, Stackable, Crystal Clear PolyStyrene Cover. The Length: 170mm (6-7/10), Width: 75mm (3), and Height: 67mm (2-3/5).

125mm Turntable Display

Three gear ratios are possible with this 3-Speed Crank Axle Gear Box. Gear it for power or speed. Durability and reliability are attained with high-quality gears and gear case. A FA-130 motor and wiring cord are included.Basic SpecificationsGear Ratios: 16.1:1 58.1:1 203.1:1Motor: FA-130

The 3mm Push Rivet Set can be used as both a fastening device and as a joint. The link can be attached and detached by adding or removing the bushing pin.Rivets:3x9mm (5)3x6.5mm (10)

Set includes 3x150mm threaded shafts, 5mm adjusters and 5mm ball head connectors. Length is adjustable, allowing shaft to be built into gearbox and used as a link-rod. Use of adjuster and ball head connectors allows movement in 3 dimensions.

Display Turntable Mirror Base by TrumpeterItem Number: TRP9835 7" Diameter, Battery Operated.

This 'AA' Size Battery Box Set is very compact and easy to assemble. The contacts are high quality to ensure proper connections. The switch with reverse is made from durable plastic.

The 'AA' Size Battery Box Set can be assembled side by side or in-line. The contacts are high quality to ensure proper connections. The switch with reverse is made from durable plastic.

Airfield Helipad Medium Display Base 11x17 (1:48) by 3Wire Display BasesItem Number: TW-M0480301The 3Wire Design 1:48 Display Base series presents highly-detailed flight-deck and tarmac panels for enhancing the realism of your 1:48 scale model aircraft collection. Authentic carrier deck or airbase markings are printed in outstanding detail and clarity directly onto the thick styrene panels. Get your models off the shelf and watch them snap into life as soon as you set them down on these...

With the Ball Caster, your project can pivot and move in almost any direction. There are two ball casters included, and height can be adjusted for various applications and projects.Basic SpecificationsHeight: Adjustable

Brand new 1/18 scale model of Collectible Display Show Case Illumicase+ with LED Lights and Mirror Base and Back for 1/64 1/43 1/32 1/24 1/18 scale models by Illumibox. Brand new box. Ultra bright LED light bar. Stack multiple cases together. PLEASE NOTE:Assemble require. Type C USB compatible(cable included). Great for all limited editions and special collections. Approximate dimensions: L-14.2, W-6.9, H-7 inches. VEHICLES PICTURED ARE NOT INCLUDED WITH DISPLAY. ...

This 'D' Size Battery Box Set can be used in-line or side by side. All contacts are made from steel. A switch with reverse is also included. Additional 'D' size Battery Box Sets can also be attached for higher output.

Decal Tray, Trumpeter Item Number TRP9918

Model Accessories. Display case suitable for 1/72 scale Military, 1/35 Figures, etc.

Apply included mirror sheet to base and show off your masterpiece from the bottom on up. Set is ideal for 1/24 Sports Car Series and 1/20 F1 Car models.Length: 240mm, Width: 130mm, Height: 110mm

This case is ideally sized to display 1/24 scale car models. Base is constructed from easy to manipulate plastic. Feel free to drill holes in the base to secure your model.DimensionsLength: 240mm, Width: 130mm, Height: 110mm (~9.5 x 5.1 x 4.3 in.)

Basic SpecificationsTamiya display cases are ideal to display your completed models and to protect them from dust and humidity.The J case (dome type), has a diameter of 125mm and a height of 95mm. The base is made of black plastic and the dome of highly transparent resin.This display case is perfectly adapted for figures or small-scale models.

This Display Case with base allows you to safely exhibit your 1/350 scale Ship Series Cruiser models.Specs & FeaturesThe Display Case is 3mm thick and made of acrylic.Inner Dimensions: 620x125x165mm.The base is dark brown and 12mm thick MDF (Medium-Density Fibreboard).This display case is perfect for 1/350 scale Ship Series models including:Item 78021 1/350 Japanese Aircraft Carrying Cruiser MogamiItem 78022 1/350 Japanese Light Cruiser MikumaItem 78023 1/350 Japanese Navy Heavy Cruiser Mogami ...

This new display case features inner dimensions which are larger than those of Item 73004 Display Case C, which enables the display of 1/20 scale modern F1 car models such as Item 20067 Red Bull RB6.Specs and FeaturesDisplay Case (Clear Case & Black Base) x1

Offering a double gearbox perfect for use in amateur robot contests, this gearbox is suitable for use with remote controlled robots. Choice of 4 gear ratios, offers emphasis on speed or power to suit your needs. Left/right independent design means you can set different gear ratios for either side.About the ModelChoice of following gear ratio: 12.7: 1, 38.2:1, 114.7:1, 344.2:1Includes motor cover and crank arm.Case and gear made from durable plastic.Includes FA-130 type motor.

Figure Display Case by TrumpeterItem Number: TRP9807

The Ladder-Chain & Sprocket Set includes 96cm of chain and several sprocket wheels. Use with other Tamiya Construction and Robotics products to create a multitude of projects.Basic SpecificationsHole Diameter: 3mmSpacing: 5mm

Brand new 1:24 scale car of Lamborghini Aventador LP700-4 Orange die cast model car.Brand new box.Rubber tires.Detailed interior, exterior.Made of diecast with some plastic parts.Has opening doors and engine compartment.Dimensions approximately L-7.5, W-3, H-2.5 inches.Please note that manufacturer may change packing box at anytime. Product will stay exactly the same.

This new Educational Construction Series gearbox can be operated by both alkaline batteries (1.5-3.0V) and electricity generated from a solar panel (0.5V, 1.5V) and can be assembled with three different gear ratios to enable various hobby applications.Specs and FeaturesOuter case is made from clear ABS material to allow the internal mechanisms to be viewed.The gearbox features three gear ratios (12.7:1, 38.2:1, 114.7:1).Comes with 3mm hex drive shaft (length: 100mm).Crank plates which can be...

Long Display Case by TrumpeterItem Number: TRP9802Inside dimensions Length: 10-1/8" (257.17mm) Width: 2-5/8" (66.67mm) Height: 3-1/4" (82.55mm)

Durable ABS resin arms offer a wide array of use in construction, such as linking, shaft coupling, or structuring. 3mm holes are allocated in 5mm intervals. Cut to required length.Basic SpecificationsWidth: 10mmLength: 210mmThickness: 3.5mm

Brand new Mirrored Rotary Display Turntable Stand 10 inches USB Powered for 1/24 1/18 scale models. Brand new box. Has "Off/Slow/Fast" switch. Great for all limited editions and special collections. VEHICLES PICTURED ARE NOT INCLUDED WITH DISPLAY. Rotating mirrored display stand can hold up to 2.5 Lbs (1.15 kg). Constant smooth rotations with slow and fast (1 rpm) speed in low power consumption. Easy to use: just use 4 x AA batteries(not included)or a USB cable(included), then switch it on. ...

Model Micro Chisel 1mm x 1mm from Trumpeter Item Number:TRP9923

Model Micro Chisel 2.8mm Diamd By TrumpeterItem Nmber:TRP9928

Model Micro Chisel 2mm Round By TrumpeterItem Nmber:TRP9926

Model Micro Chisel 2mm X 2mm By TrumpeterItem Nmber:TRP9924

Model Micro Chisel 3mm Round By TrumpeterItem Nmber:TRP9927

Model Micro Chisel 3mm X 3mm By TrumpeterItem Nmber:TRP9925

Modelling Clamps W/Base, Trumpeter Item Number TRP9914

The Narrow Tire Set works well in onroad conditions. Two sets of hubs have been included along with a wrench to change the hubs. One set of hubs is for hex shafts like those on many of Tamiya's gear boxes, and the other set of hubs is for round shaft applications.Basic SpecificationsDiameter: 58mmWidth: 16mmHubs: 2 round shaft and 2 hex shaft

Naval Helipad Medium Display Base 11x17 (1:48) by 3Wire Display BasesItem Number: TW-M0480401The 3Wire Design 1:48 Display Base series presents highly-detailed flight-deck and tarmac panels for enhancing the realism of your 1:48 scale model aircraft collection. Authentic carrier deck or airbase markings are printed in outstanding detail and clarity directly onto the thick styrene panels. Get your models off the shelf and watch them snap into life as soon as you set them down on these...

P/E Parts Bender Lg By TrumpeterItem Nmber:TRP9931

P/E Parts Bender Sm By TrumpeterItem Nmber:TRP9933

Panel Engraver Tool, Trumpeter Item Number TRP9912

Parts Holder/Paint Tray, Trumpeter Item Number TRP9913

This item is made from the same lightweight plastic material as Tamiya's other Plastic Board and Plastic Beam products and may be used for various craft and hobby applications. Their L-shaped cross-sections mean they are ideal for reinforcing corners as well as areas which may need strengthening against torsion forces.Specs and FeaturesItem 70199 dimensions: Width: 3mm, Length: 400mm, Thickness: 1mmCompatible with plastic model paints and cements.

Stackable for easy display

Plastic Ring /Circle & Dis 30m By TrumpeterItem Nmber:TRP9938

Plastic Ring /Circle & Disc By TrumpeterItem Nmber:TRP9937

The Large Pulley Set includes similar components as the Small Pulley set but with larger pulleys. Pulley sizes included are 11mm, 25mm, and 50mm. Also included in the set are several power bands.Basic SpecificationsPulley Sizes: 11mm, 25mm, and 50mm

Included in the Small Pulley Set are a variety of small pulleys and power bands. Use with any combination of Tamiya Construction and Robotics projects. Pulley sizes included are 11mm, 20mm, and 30mm.Basic SpecificationsPulley Sizes: 11mm, 20mm, and 30mm