Remote Control

#8 Flat Washer by DU-BRO Item Number: DUB327

The Laser Classic collection from Dumas is the best of both worlds. The technology and precision of laser cutting combined with our ever-popular Chris-Craft line. The Classic Collection premiers with the introduction of three new kits. They are the 1929 Chris-Craft 24 ft. Runabout, kit #1701, the 1949 Chris-Craft 19 ft. Racer, kit #1702, and the 1938 Chris-Craft 27 ft. Triple Cockpit Barrelback, kit #1703. The Classic Collection kits feature laser cut balsa and mahogany parts, peel and stick...

The .050 Ball wrench is 3 long and fits 4-40 socket set screws. Ideal for most wheel collars & other set screws. 1 per package.

100TW takes a 3/32 Axle (2mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub. Heavy duty use, solid rubber type tire. Wheel width at hub: .450" (11.4mm). Use with #376 tailwheel bracket.

Ideal for indoor and park flyers. Our Mini Lite Wheels are lightweight and features a 2 piece press together hub and a super light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles. These Mini Lite Wheels are sure to give your airplane that scale look. Use with #944 or #868 Micro Wheel Retainers. Hubs can be painted with paint made for plastic. Wheel Width: .315" (8.00mm) - Axle Dia.: .047" (1.2mm)

150TW takes a 1/8 Axle (3mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub.

Du-Bro's Kwik-Switch & Charging Jack offers a clean and simple way to mount receiver battery switches and charging plugs. Designed to mount on any aircraft fuselage within minutes, the Kwik-Switch & Charging Jack uses one single set screw to lock the charging plug into place. Universal and will fit all radio systems!

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts. You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind.Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts. You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts. You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts. You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts. You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

1 1/4 (32mm) Cut Off Wheel with a Mandril. Great for cutting most woods, plastics, and metals.

Perfect for cutting through most woods, plastics and metals. Designed with fiberglass reinforcement to prevent brittleness.v

125TW takes a 3/32 Axle (2mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub.

Bolts to any dural landing gear. Easy installation. Available in four sizes. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Ideal for indoor and park flyers. Our Mini Lite Wheels are lightweight and features a 2 piece press together hub and a super light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles. These Mini Lite Wheels are sure to give your airplane that scale look.

1 1/4 (31.7mm) steering arm assembly. Nylon steering arm with bushing and set screw fits 5/32" (4mm) nose gear wire.

175T takes a 1/8 Axle (3mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts). You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts). You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts). You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind.Use Allen Wrench size 5/64" (not included).

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts). You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind. Use Allen Wrench size 5/64" (not included

Simple, easy and safe to install (no need to use the palm of your hand). The spinners are available in 7 sizes. Each spinner comes complete with 5 shaft adapters (5mm, 6mm, 1/4", 7mm, 5/16" shafts). You don't have to drill out our back plates! Features a unique nylon insert lock design for attaching the back plate and spinner - giving a solid and secure hold. Designed with safety in mind.Use Allen Wrench size 5/64" (not included).

By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models.

Three more Micro Wheels to choose from! These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.230" (31mm) / Axle Dia. = .047" (1.2mm) / Weight = 1.1 grams/ea]

Three more Micro Wheels to choose from! These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.450" (37mm) / Axle Dia. = .078" (2.0mm) / Weight = 1.8 grams/ea]

Fits 2.0MM Socket Head. The perfect tool for getting at those hard to reach places. Ball wrenches make it possible to turn socket head screws or bolts from any angle.

Three more Micro Wheels to choose from! These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.860" (47mm) / Axle Dia. = .078" (2.0mm) / Weight = 3.2 grams/ea]

Lighten up with our all new Micro Wheel Collars. Designed for electric flyers with .047� to .062� axles and use set screws for a secure fit. These Micro Wheel Collars are 50% LIGHTER than standard 1/16� brass wheel collars. Each collar weighs 0.42 grams. Each pack includes (4) collars with set screws and a .050� allen wrench.

1/16" Ball Driver without holder.

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths.

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

This 4 piece set fits perfectly in servo arm hole, bellcranks, nylon horns, and throttle arms. Set includes (1) ball threaded for 0-80 (1/16" diameter thread), (1) self threading nylon socket, (1) threaded coupler 3/4" long with 3/8" 2-56 thread for up to .072" wire.

Great for covering soldered connections. Available in 6 sizes.

Nylon 3/4 long with 4 adjustment positions. Includes 2 control horns centered on base, 2 self threading nut plates and (4) 2-56 x 3/8 screws.

Easy to install, light and compact. Especially made for 1/2A airplanes. Features Mini Nylon Kwik-Links, Spring Threaded Couplers, Nylon Rod Ends, Brass Trubes and 1/16" diameter wire.

You asked...we delivered! Our NEW Micro Tail Wheels are available in two sizes, 3/8" & 1/2". Both sizes come complete with tail wheels (2), and Micro Wheel Retainers (4) per package.

High quality foam rubber. Works great for protecting your receiver and fuel tank from vibration and also gives protection during a crash. Available in two sizes 1/4 (6.3mm) and 1/2 (12.7mm) Each piece measures 7 (177.8mm) X 11 (279.4mm).

1/3 Scale Tire takes a 3/16(4.7mm) Axle. Add the realism and final detail to your J-3 Cub with Du-Bro's Treaded Lightweight Cub Wheels. These J-3 Cub Wheels offer bolt together hubs and realistic looking Cub wheel covers. Available in three sizes, these lightweights feature a foam interior, yet have a tough and rugged exterior skin for durability.

Now you can build that vintage aircraft you've always wanted to. Our scale vintage wheels come in three sizes, 1/3 scale (9.33"), 1/4 scale (7") and 1/5 scale (5.60") and are made of lightweight solid foam material which is very durable. The Vintage series was designed from actual wheels of WWI and other early aircraft. Internally, the tire is secured to the hub which is paintable ABS plastic. The axle diameter is 1/4". Each wheel weighs approx. 20.5oz. 2/pkg.

1/4 Scale Tire takes a 5/32(4mm) Axle. Add the realism and final detail to your J-3 Cub with Du-Bro's Treaded Lightweight Cub Wheels. These J-3 Cub Wheels offer bolt together hubs and realistic looking Cub wheel covers. Available in three sizes, these lightweights feature a foam interior, yet have a tough and rugged exterior skin for durability.

1/4 Scale Turnbuckles by DU-BRO Item Number: DUB300

Du-Bro Spinner Prop Nuts work with standard electric starting cones, meet AMA safety specs, and are CNC machined from 6061 T6 aluminum.

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths.

High quality foam rubber. Works great for protecting your receiver and fuel tank from vibration and also gives protection during a crash. Available in two sizes 1/4 (6.3mm) and 1/2 (12.7mm) Each piece measures 7 (177.8mm) X 11 (279.4mm).

Bolts to any dural landing gear. Easy installation. Available in four sizes. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Du-Bro Spinner Prop Nuts work with standard electric starting cones, meet AMA safety specs, and are CNC machined from 6061 T6 aluminum.